When to Use Adjustable Rocker Clamps:

Use Adjustable Rocker Clamps with dies having a cutout clamp position, narrow slot in the die or for typical clamp plate applications with variable clamp plate thickness across several dies. Also, ledge brackets, blocks, bars, or ears may be added to dies in some applications to accommodate the clamps and/or small slots cut into the dies to accept the smaller clamp nose.

If systems are setup to have hydraulics removed during stamping, Hydra Mechanical (L style) clamps (with a mechanical lock) should be selected. If a dedicated hydraulic system is considered, the Fully Hydraulic clamps (with either multiple upper zone control or check valves) may be the preferred choice. Clamp model and quantity should be selected to provide a total clamping force greater than the total (static and dynamic) force applied to the system during use.

How They Work:

The Adjustable Rocker Clamps are moved into position with the lower body stop set against the die plate (gaps between clamp and die/slot allow movement). The center height adjustment knob is turned clockwise until the nose of the clamp touches the clamp plate. When hydraulic pressure is applied, the clamp nose moves downward onto the plate, clamping the die. Hydraulic pressure is maintained during operation, or the Locking Nut (L style) is engaged to allow removal of clamp hydraulic pressure during stamping. To unclamp, hydraulic pressure is removed and clamps open under internal spring force. (Note: Reapplication of hydraulics is required to unlock the Locking Clamps (L) prior to releasing pressure and unclamping). After the clamp is released, the adjustment knob is turned to further open the clamp, as desired.